Shower enclosure installation

Friday, February 22nd, 2008

Shower enclosures and cubicles are available in a number of different designs and sizes. Generally the height of panels are 1800mm. As styles are available in quadrant, rectangular, square, pentagonal and off-set designs, each installation will require a different set of procedures, so consult the installation manual provided. Here is a checklist of things ...

Posted in Showers | No Comments »

10 tools for installing a shower

Wednesday, February 20th, 2008

Before undertaking a shower installation there is a checklist of tools you will need for the job in hand: Spirit level. Tape measure. Electric drill. 3/16-inch masonry bit for boring holes in tile and 7/32- and 3/16-inch twist bits for pilot holes in aluminum.  Caulking gun with clear, mildew—resistant silicone sealant. Automatic punch. 10 inch single cut file. Ratcheting ...

Posted in Showers | No Comments »

How to install a shower tray

Wednesday, February 20th, 2008

Firstly, ensure you buy the correct size and acceptable shower tray before you begin your new shower enclosure installation. If you are tiling in the enclosure leave this until after the tray is fitted. Now, temporarily fit the waste and trap to the tray, then move the tray into position against the walls.  If ...

Posted in Showers | No Comments »